Description Core Policy
1 - DELPHI MANUFACTURED AGAIN CAT 3406E INJECTOR - EX630957
O-rings as shown are preinstalled on the injectors
Dieselogic injectors are covered under our 1 Year Unlimited Mileage Warranty
Cross Reference Numbers:
With 60 years of experience in OE
manufacturing, Delphi Technologies has the expertise and knowhow necessary to deliver a quality
manufactured again product.
In their manufactured again facility all
injectors are fully disassembled. Each component is then thoroughly cleaned and inspected. All
nozzles are reground, inspected,
matched and flowed. Units are
then reassembled and tested on
specialized test equipment for
correct fuel, timing and pressure.
Item Condition: Manufactured Again
-This is a Manufactured Again product.
These are premium Manufactured Again & tested/calibrated injectors using only OEM (original equipment manufactured) cores. These injectors are the latest revision and up-to-date OEM specifications required to replace the original generation legacy injector.
“Manufactured Again” The definition:
A properly “Manufactured Again” injector is the functional equivalent of a new part and is virtually indistinguishable from new part performance. Manufactured Again takes products through a restorative process, using highly refined industrial procedures in a factory setting to promote greater resource productivity, and aims to reduce waste and avoid pollution. It is the only form of reuse, re-purpose, repair, or recycle that produces warranted products that meet or exceed quality and performance expectations.
Invest in a quality product instead of being misled by false representations of a “quality” Manufactured Again injector.
Every injector is completely disassembled, cleaned and 100% of all parts/components examined for wear and breakage. Worn out, missing or non-functioning components are replaced with new or manufactured again components. After full disassembly is complete, the part is reassembled and tested for compliance with OEM performance specifications.
Mounting Hardware Included
Gasket Or Seal Included
Metal and Plastic
Retainer Clips Included
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Dieselogic injectors are covered under our 1 Year Unlimited Mileage Warranty
- A9513: 1996 - 1998
- AT9513: 1996 - 1998
- AT9522: 1997 - 1998
- L9000: 1994 - 1997
- L9513: 1997
- LA9000: 1994 - 1996
- LL9000: 1995
- LLA9000: 1994
- LLS9000: 1994 - 1995
- LN9000: 1994 - 1995, 1997
- LNT9000: 1994 - 1997
- LS9000: 1994 - 1996
- LT9000: 1994 - 1997
- LT9511: 1998
- LT9513: 1996 - 1998
- LT9522: 1997 - 1998
- LTA9000: 1994 - 1997
- LTL9000: 1994 - 1997
- LTLA9000: 1994 - 1997
- LTLS9000: 1994 - 1997
- LTS9000: 1994 - 1997
- Argosy: 1999 - 2001
- Century Class: 1997 - 2001
- Columbia: 2000
- FLA086: 1994
- FLB: 1994 - 1999
- FLC112: 1994 - 1998
- FLD112: 1994
- FLD120: 1994 - 2001
- FLL086: 1994
- 3800: 1997 - 1999
- 4700: 1995, 1998
- 4900: 2000
- 5000: 1999
- 5070: 1995 - 1999
- 5500i: 2000 - 2003
- 5600i: 2000 - 2003
- 8200: 1994 - 1998
- 8300: 1994
- 9200 SBA: 1996
- 9200i SBA: 2002 - 2003
- 9300: 1994 - 2000
- 9400: 1994 - 2000
- 9400i SBA: 2000 - 2003
- 9900: 1999 - 2000
- 9900i: 2000 - 2003
- 9900ix: 2000 - 2003
- 9900ix SFA: 2003
- F5070: 1994 - 2000
- C500: 1994 - 1999
- C550: 1994
- K100E: 1994 - 1999
- T2000: 1997 - 1999
- T400: 1995
- T600A: 1994 - 1999
- T800: 1994 - 2000
- W900: 1994 - 2003
- CL: 1994 - 1999
- RD: 1994 - 1999
- 330: 1997
- 357: 1994 - 1999
- 362: 1994 - 1999
- 372: 1994
- 376: 1994 - 1996, 1999
- 377: 1994 - 1999
- 378: 1994 - 1999
- 379: 1994 - 2003
- 387: 2000 - 2003
- AT9500: 1999 - 2001
- AT9513: 1999 - 2000
- AT9522: 1999 - 2000
- Acterra 5500: 2001
- LT9500: 1999 - 2001
- LT9511: 1999 - 2000
- LT9513: 1999 - 2001
- LT9522: 1999 - 2001
- ST9500: 1999 - 2001
- ACL: 1996 - 1999
- VN: 1998 - 1999
- VNL: 2000
- WC: 1996 - 1998
- WG: 1998
- WI: 1996 - 1998
- 3800: 1994 - 1997, 2000 - 2001
- 4800: 1994 - 2001
- 4900: 1994 - 2001
- 4900E: 1997 - 2001
- 5800: 1997 - 2000
- 5900: 1994 - 2001
- 6900: 1994 - 2000
- ACL: 1994 - 1995
- WCA: 1994 - 1995
- WCM: 1994 - 1995
- WHEB: 1994
- WHL: 1994 - 1995
- WHR: 1994
- WIA: 1994 - 1995
- WIM: 1994
If you have any questions or concerns, please call (888) 592-8539 and our customer satisfaction team will be happy to assist you.
PLEASE NOTE: Cores are required to be like for like.
All cores must be in acceptable cosmetic condition, per Criteria outlined below, with original body and no external damage. Dieselogic is not responsible for any damage caused during transit of Core Return. Buyer is responsible for all shipping, handling, insurance, customs, duties and import fees, tariffs and taxes, and all other similar associated costs and charges.
Core Acceptability Criteria are:
- cores must be 'like for like' (same as what was purchased)
- cores must be in original condition, and damage free
- cores must contain all internal components
- cores must be returned within 60 days of product ship-out date
The following will result in denial or partial credit of Core Charge:
- cores are not 'like for like' (not the same injector as what was purchased)
- cores are damaged (Buyer is responsible for transit damage)
- broken/missing solenoid dividers
- broken/missing electrical connecting studs
- missing/damaged nozzles
- missing external components
- missing internal components
- core tampering or suspected disassembly/assembly
- cores are returned past 60 days of product ship-out date
How would you like to handle your Core Return?
Please choose from one of the three options outlined below.
Option #1 - ZERO COST DEPOSIT
The customer will be temporarily charged for the full Core Deposit. You will have 60 days to return old Cores from the original ship date for a full refund. Cores received after 60 days will be eligible for a partial refund.
Option #2 - PAY CORE CHARGE
The customer agrees to pay the full Core charge. The customer does not have to return old Cores. You may choose to return old Cores within 60 days from the original ship date for a full refund. Cores received after 60 days will be eligible for a partial refund.
Option #3 - RETURN CORES IN ADVANCE
The customer may send cores in advance. Once we receive your Advance Cores we will release your Order for shipment. Please send your Advance Core to:
2345 HARPER ST BLDG B
JACKSONVILLE, FL 32204
ATTN: ADVANCE CORE
Cores returned after 60 days will be issued a 75% refund. Cores returned 90 days to 120 days after the original ship date will be issued a 50% refund. Later return refund amounts vary based on wholesale market value.
Please review common Core Deposit/Charge amounts based on your Core Type in the table below. Other Core Deposit/Charge amounts may vary.
SET OF (6)
SET OF (8)
NEW PART RETURNS
Please click here to fill & submit an RMA form.
NEW PART RETURNS
Your satisfaction is very important to us. You may return an item purchased from Dieselogic for any reason up to 30 days from the original invoice date provided, in our determination, that the Product is in “brand-new” condition, has not been installed, and is returned in the original packaging. No refunds will be given on Products that have been installed, tampered with, contaminated, or disassembled.
To return an item, you must first request a Return Merchandise Authorization (“RMA”) number from Dieselogic. To obtain an RMA number, please click on the link above under “RMA Form.” Once an RMA number has been issued, add your RMA number to the address below and send the Product to:
2345 Harper St.
Jacksonville, FL 32204
Shipping costs to send the returned Products to us are the responsibility of the customer. If an item was purchased with free shipping, the costs of shipping will be deducted from the refund amount. If it applies, the cost of the core shipping label will also be deducted from the refund amount.
Orders returned 30-60 days from the original invoice date will be assessed a 15% restock fee. Orders returned beyond 60 days are not returnable.
Once we have inspected the Products and confirmed they are in new and resalable condition as required by this Policy, we will process your refund.
Some Circumstances in which credit will NOT be issued are not limited to:
• Product is a “Special Order” item
• Product has been installed and/or used
• Product has been damaged from an attempt to be installed and/or used
• Product is shipped back without original box, manual and/or parts
• Seal on electrical parts is broken
• Product serial number does not match that which was originally shipped to buyer
• Product is deemed not resalable by Dieselogic due to customers own actions in dealing with the Product
All orders shipped from dieselogic.com are shipped via customer's request when applicable. Free UPS Ground shipping and core return labels are offered to contiguous USA customers only
. Shipping is free on all orders over $100.00 to contiguous USA customers. Due to UPS regulations we cannot ship website orders to a PO Box. Due to FAA regulations flammable liquids (fuel additive) cannot be shipped via air freight; these items must be shipped via UPS ground service. We make every effort to ship all orders within 48 hours, excluding weekends and National Holidays.
Expedited Shipping Disclosure
Dieselogic does offer expedited shipping via UPS. It is important to note that the expedited shipping time refers to the time from orders leaving our facilities to the shipment destination. Some orders will require production, assembly, or procurement time before the order is ready to be shipped. Please contact our team to discuss if your order will be subject to these limitations. Effective March 26, 2020 and until further notice, UPS has suspended the UPS Service Guarantee (also referred to as the UPS Money Back Guarantee) for all shipments from any origin to any destination.
Shipping costs on orders placed outside of the Contiguous US may not have accurate shipping charges assessed at check out; in this case the shipping cost will be calculated and we will contact the customer for confirmation of this charge. Buyer shall be responsible for all shipping, handling, insurance, customs, duties and import fees, tariffs and taxes, and all other similar costs and charges. Dieselogic reserves the right to pass any additional shipping expenses incurred from Buyers shipping instructions to the Buyer. All orders for customers outside of the US for injectors, turbos and pumps; must send us their cores in advance or pay for them in full. Please contact us at 904.786.7402 or via email at firstname.lastname@example.org for further information.